Water-based, nonionic, medium-viscosity polydimethylsiloxane silicone oil emulsion.
| General Properties | |
| Appearance | Milky white |
| Physical state | Liquid |
| Emulsifier type | Nonionic |
| Solid content | 60-65% |
| Particle size | <350 nm |
| pH Value | 4.0-7.0 |
The data in the table is for guidance only and cannot be used for creating specification values.
Application fields
TEOSIL 1060 is compatible with Nonionic, anionic, and cationic surfactants and polymer systems, can be used in cold liquids, and its emulsion stability is excellent, maintaining stability even when diluted with a high amount of water.
In rubber and composite product manufacturing, TEOSIL 1060 provides shine, slipperiness, non-stick properties, elasticity and ease of assembly, while also offering resistance to sunlight, stain removers, and providing water repellency.
TEOSIL 1060 is used as a raw material in the production of polishing, protective and nourishing surface care products, automotive care products, and household cleaning chemicals. It imparts resistance to detergents and stain removers, scratching, friction, abrasion, and aging.
In textile finishing, dyeing and sizing processes, TEOSIL 1060 gives Yarn and woven Fabric surfaces shine, enhances color vibrancy and depth. In yarn manufacturing, it strengthens the Yarn body, provides slipperiness, resistance to friction and high heat, enhances fluidity and ease of sewing, and provides shine and water repellency.
TEOSIL 1060 is also used as a lubricant in fiberglass filter manufacturing.
Preparation for Use
TEOSIL 1060 is diluted with cold water of medium hardness at a ratio of 1:1 to 1:10. The dilution ratio must be determined according to the surface to be applied and the desired gloss performance. The silicone emulsion diluted with water can be used for a long time; however, the quality of the water (pH level, bacteria, minerals, etc.) may negatively affect the stability of the emulsion and cause separation. Therefore, it is recommended to use the emulsion within a short time. For optimal performance, pilot-scale tests should be performed before production to determine the correct dilution ratio and usage amount.
This document does not contain safety information regarding product use. Before use, the Safety Data Sheet should be reviewed carefully for indicated information and hazard warnings.
Occupational safety, health and environmental compliance information is provided in the Safety Data Sheet.
The information in this document is for guidance only and is prepared according to the latest technical data we have obtained. This does not eliminate the user’s responsibility to perform incoming quality control tests for the received product. Teokim reserves the right to revise the information in this document in line with technical developments and current regulations. The user must test and verify whether the information and recommendations in this document are suitable for their intended use and production process, and whether the product is compatible with chemicals from other suppliers before use in production. The information here does not exempt the user from investigating possible third-party rights violations if applicable. The information and recommendations provided do not constitute a guarantee for a particular use and should not be assumed as such.
The expiration date is indicated on the original packaging. Exceeding this date does not necessarily mean the product cannot be used; however, suitability for use should be tested before production. The product must not be exposed to direct sunlight or frost and should be stored tightly sealed in a cool and protected environment.
The product should be thoroughly mixed before use.
The Safety Data Sheet is provided upon request.
Water-based silicone emulsion with Nonionic structure, used as a lubricant and mold release agent.
| General Properties | |
| Appearance | Whitish |
| Physical state | Liquid |
| Emulsifier type | Nonionic |
| Solid content | 35% (±2) |
| pH Value | 5.0 – 7.0 |
The data in the table is for guidance only and cannot be used to create product technical specifications.
TEOSIL 1035 is ready for use. If diluted with water, the amount of water added to the silicone emulsion should be determined based on the desired lubricating and/or mold release effect. Test applications are recommended to determine the ideal usage amount. TEOSIL 1035 can be applied by spraying with an air gun, brushing, or dipping.
The product should be thoroughly mixed before use. The silicone emulsion diluted with water should be consumed in a short time.
Precautions During Use
This document does not include safety information related to product use. Before use, the Safety Data Sheet should be reviewed carefully.
Health and Environmental Compliance
Occupational safety, health and environmental compliance information is provided in the Safety Data Sheet.
The information in this document is for guidance purposes only and reflects the latest technical data available. This does not remove the user’s responsibility to perform incoming quality controls. Teokim reserves the right to modify this document according to technological developments and current regulations. The user must test and verify whether the product is suitable for their intended use and production process, and whether it is compatible with chemicals from other manufacturers before use. The information here does not exempt the user from investigating third-party rights or eliminating any potential risks. These details do not constitute a guarantee of suitability for a specific purpose and cannot be interpreted as such.
The expiration date is indicated on the original packaging. Exceeding this date does not necessarily mean the product is unusable; however, suitability should be tested before use. The product must not be exposed to direct sunlight or frost and should be stored tightly sealed in a cool, protected place.
The Safety Data Sheet is provided upon request.
Silicone emulsion is a suitable, inert, heat-resistant, non-toxic chemical to shine, lubricate and impart antistatic properties in many industrial applications.
EMS Silicone Emulsions is a general purpose fluid nonionic polydimethylsiloxane emulsion. It is manufactured using a high and low viscosity PDMS mixture for a higher gloss effect and more durable separator.
EMS Silicone Emulsions can be stored in closed packages for at least 18 months. The material must be protected at + 5oC and + 30oC.
Ambalaj : 200kg PE drums and 950 / 1000kg IBC tanks.